These instructions only apply to customers that have Genius Full (modem+handset).

Follow the instructions below if you want to register your new Genius handset., or if you want to re-register a handset as part of troubleshooting.

Want to access all the cool features the Orcon Genius handset offers? There's a manual at the bottom of this article you can download!

How to register/de-register/re-register your Orcon Genius handset.

1. On your computer, open your web browser and go to the address 10.1.1.1 to log in to your modem (Default password is ‘admin’)
2. Click "Setup my Voip"
3. Click "Dect settings" from the left side menu
4. Check to see if the handset is registered (should be visible on this screen) - If the handset is registered unregister it by clicking "Unregister" button.
5. Enter the old pairing key "0000" then enter the new pairing key "1234". Confirm the new pairing key "1234" then save the new pairing code (default pairing key is "0000" - the new pairing key can be any four digits you like, "1234" is just an example).
6. On the handset, press "->" (right option/arrow on the square pad under the "OK" button of the handset)
7. Select "Settings" on handset press "OK" button
8. Select "Handset" on handset press "OK" button
9. Select "Register handset" on handset press "OK" button
10. Enter the pairing code "1234" and start pairing, as soon as you do this make sure you click the "Register" button on the "Dect settings" page
11. You should now see that the handset is registered on the "Dect settings" page