Follow these simple steps to set up Wi-Fi on your NL1901 Business Modem.

Method 1: My Orcon

1. Go to My Orcon.

2. Log in (with your Orcon account email and password) and find ‘My Wi-Fi’ in the menu.

3. Enter a new network name and password for your Wi-Fi.

4. Press ‘Save’.

Make sure all of your devices use the new network name and password.

Method 2: Modem Interface

Make sure you’ve connected your device to the modem via cable or Wi-Fi before completing these steps.

1. Open an internet browser and type in 192.168.1.1

2. Enter the user name and password:

Username: admin
Password: last 6 digits of modem MAC address (all lower case), which you’ll find on the back of your modem

3. Select ‘Wireless’ in the left-hand menu 

4. Select ‘2.4 GHz’ in the left-hand menu under ’Wireless’ 

5. In the field labelled ‘SSID’, enter your new Wi-Fi name, then click ‘Save’ 

6. Select ‘Security’ under ‘2.4GHz’ in the left-hand menu 

7. In the field labelled ‘WPA/WAPI passphrase’, enter a new Wi-Fi password and click ‘Save’

8. Repeat the process from step 5 for the ‘5 GHz’ section. Make sure the Wi-Fi name (SSID) and password are identical to the ‘2.4 GHz’ Wi-Fi. Your devices will connect to the most suitable network automatically.

Make sure all of your devices use the new network name and password.